Problem Cause Solution
Misfeeds occur frequently. Printed paper is being used. Do not load sheets that have already
been copied or printed.
Misfeeds occur frequently. Sheets are sticking together. Fan the sheets thoroughly before
loading them. Alternatively, feed the
sheets into the machine one at a time.
Sheets are fed in together,
resulting in jams.
Sheets are sticking together. Fan the sheets thoroughly before
loading them. Alternatively, feed the
sheets into the machine one at a time.
Paper becomes creased. The paper is damp. Use paper that has been stored in the
recommended temperature and
humidity conditions. For details about
the paper storage conditions we
recommend, see page 240 "Paper
Storage".
Paper becomes creased. The paper is too thin. Use recommended paper. For details
about recommended paper, see
page 207 "Recommended Paper Sizes
and Types".
Edges of sheets are creased. The paper is damp. Use paper that has been stored in the
recommended temperature and
humidity conditions. For details about
the paper storage conditions we
recommend, see page 240 "Paper
Storage".
Edges of sheets are creased. You are using non-
recommended paper.
Use recommended paper. For details
about recommended paper, see
page 207 "Recommended Paper Sizes
and Types".
Duplex printing cannot be
applied.
You have loaded paper that
is too thick or thin.
Change the paper. For details about
paper weight that can be used for
duplex printing, see "Specifications for
the Main Unit", Specifications.
Troubleshooting When You Use the Printer Function
487
To Next Page
Loading...
