Ricoh PRO C7200S - Page 506

When Mk12 – Mk14 is displayed
• Check that the LED on
the front right cover of
the perfect binder is
unlit.
• Open the front right
and front left covers of
the perfect binder.
• Raise lever Mk12, and
then remove misfed
paper.
• Return lever Mk12 to
its original position.
• Turn lever Mk13 to the
left.
• Remove misfed paper.
• Lower lever Mk14, and then remove misfed paper.
• Return levers Mk14 and Mk13 to their original positions.
• Close the front left and front right covers of the perfect binder.
CXG015
When N1 – N5 is displayed
CDN025
11. Troubleshooting
504