Ricoh PRO C7200S - When Rb6 - Rb9 is displayed (when Booklet Finisher SR5060 is installed)

When Rb1 – Rb5 is displayed (when Finisher SR5050 is installed)
• Open the finisher front
cover.
• Raise lever Rb1, and
then remove misfed
paper.
• Turn knob Rb2, and
then remove misfed
paper.
• Return lever Rb1 to its
original position.
• Turn lever Rb4 to the
right, and then
remove misfed paper.
• Return lever Rb4 to its
original position.
• Raise lever Rb5 to the right, and then
remove misfed paper.
• Return lever Rb5 to its original position.
• Close the finisher front cover.
• Raise lever Rb3, and
then remove misfed
paper.
• Return lever Rb3 to its
original position.
CXG020
When Rb6 – Rb9 is displayed (when Finisher SR5050 is installed)
• Remove misfed paper.
• Close the finisher front cover.
• Open the finisher front
cover.
• Lower lever Rb6.
• Pull lever Rb7 to the
left.
• Turn knob Rb8, and
then remove misfed
paper.
• Return levers Rb6
and Rb7 to their
original positions.
• Pull lever Rb9 to the
left.
CXG021
Clearing Misfeeds
507