When using the four-line LCD panel model
1. Press the [Copy] key.
2. Place the original on the exposure glass or in the ADF.
To place the original, see page 89 "Placing Originals". If necessary, configure advanced
photocopy settings.
3. To make multiple copies, enter the number of copies using the number keys.
4. Press the [Start] key.
• The maximum number of copies is 99.
• You can change the paper tray temporarily for printing out copies. To change the setting, press the
icon indicating the tray if you are using the touch panel model, or press the [ ] or [ ] key if you are
using the four-line LCD panel model. Also, you can select to change the paper tray automatically
according to the paper size (A4 or Letter).
• You can select the paper tray for printing out copies in [Select Paper] under copy settings. If you set
the machine to switch between Tray 1 and other trays automatically depending on the paper size
in this setting, you can also specify the tray the machine uses first in [Paper Tray Priority] under the
paper settings. For [Select Paper], see page 239 "Copier Features Settings (When Using the
Touch Panel Model)" or page 287 "Copier Features Settings (When Using the Four-line LCD Panel
Basic Operation of Copying
115
To Next Page
Loading...
