Ricoh SP 3710SF - Specifying Resolution

"Administrator Tools Settings (When Using the Touch Panel Model)" or page 310
"Administrator Tools Settings (When Using the Four-line LCD Panel Model)".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Specifying Resolution
This section describes how to specify the scan resolution for the current job.
There are six resolution settings. The higher the resolution, the higher the quality but greater the file size.
When using the touch panel model
1. Press the [Home] key.
DYG322
2. Press the [Scanner] icon on the [Home] screen.
3. Press [Scan Setting].
4. Press [Resolution...].
5. Select the desired resolution, and then press [OK].
6. Confirm the resolution you selected is displayed, and then press [OK].
5. Scanning Originals
190