Priority Tray Tab
Priority Tray
Item Description
Printer Select the tray that the machine checks first for paper that can be used for
the job from [Tray 1], [Tray 2], or [Bypass Tray].
If automatic tray selection is specified for the print job and multiple trays
contain valid paper, the first tray the machine finds will be used for printing;
when that tray runs out of paper, the machine automatically switches to the
next tray to continue printing.
Copier Select the tray that the machine checks first for paper that can be used for
the job from [Tray 1], [Tray 2], or [Bypass Tray].
If [A4 (210 × 297 mm)] or [Letter (8.5 × 11)] is selected for [Select Paper]
in the [Copier] page and multiple trays contain valid paper, the first tray the
machine finds will be used for printing; when that tray runs out of paper, the
machine automatically switches to the next tray to continue printing.
Fax (only when using
the touch panel model)
Select the tray that the machine uses first for printing out faxes from [Tray 1]
or [Tray 2].
If [Auto] is selected for [Select Paper Tray] in the [Fax] page and both Tray
1 and Tray 2 contain paper of the same size, the machine starts to print
from the specified tray. If that tray runs out of paper, the machine
automatically switches to the other tray to continue printing.
• The information about Tray 2 appears only when it is installed.
Toner Management Tab
Toner Saving
Item Description
Toner Saving Enable this setting to print using a reduced amount of toner when printing
out copies.
Configuring the System Settings
341
To Next Page
Loading...
