Basic Operation for WIA Scanning
WIA allows computers running Windows Vista SP1 or later versions of Windows operating systems and
Windows Server 2008 or later to perform scanning over a network.
The procedure in this section is an example based on Windows 10.
1. Place the original on the exposure glass or in the ADF.
2. On the [Start] menu, select [Control Panel] under [Windows System].
3. Click [View devices and printers].
4. Right-click the icon of the printer model you want to use, and then click [Start scan] to
open the dialog box for the scan settings.
5. In the dialog box, configure the scan settings as required, and then click [Scan].
6. Click [Import].
5. Scanning Originals
182
To Next Page
Loading...
