Ricoh SP 3710SF - System Settings (When Using the Touch Panel Model)

System Settings (When Using the Touch Panel
Model)
This function is available for SP 330SFN/3710SF only.
Adjust Sound Volume
Specifies the volume of the sounds produced by the machine.
Item Description Value
Panel Key
Sound
Specifies the volume of the beep that
sounds when a key is pressed.
• Off
• Low
• Middle
• High
Default: [Low]
Ring Volume Specifies the volume of the ringing
tone.
• Off
• Low
• Middle
• High
Default: [Middle]
On Hook
Mode
Specifies the volume of the sound from
the speaker during on hook mode.
• Off
• Low
• Middle
• High
Default: [Middle]
Job End Tone Specifies the volume of the beep that
sounds when a job is complete.
• Off
• Low
• Middle
• High
Default: [Middle]
7. Configuring the Machine Using the Control Panel
256