Ricoh SP 3710SF - Basic Procedures for Saving Scan Files on a USB Flash Memory Device

Basic Procedures for Saving Scan Files on a
USB Flash Memory Device
This section explains basic operations of Scan to USB. Files are saved to the USB flash memory device
inserted into the machine.
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
• This machine does not support the use of external USB hubs.
• Not all types of USB flash memory devices are supported.
• When using Scan to USB, set [Save Scn Data to USB] to [Active]. For details, see page 271
"Administrator Tools Settings (When Using the Touch Panel Model)" or page 310 "Administrator
Tools Settings (When Using the Four-line LCD Panel Model)".
When using the touch panel model
1. Insert the USB flash memory device into the USB port.
DYH234
2. Press the [Home] key.
DYG322
3. Press the [Scanner] icon on the [Home] screen.
5. Scanning Originals
170