4. Press the [USB] tab.
5. Place the original on the exposure glass or in the ADF.
To place the original, see page 89 "Placing Originals".
Specify the scanning settings as necessary. For details of specifying the scanning settings, see
page 187 "Specifying Scan Settings for Scanning".
6. Press the [Start] key.
Depending on the machine's setting, you will see the following screen on the display.
• When in halftone black-and-white scanning mode:
• When in color or gray scale black-and-white scanning mode:
7. Press the appropriate selection key according to the desired file format, and then
press [OK].
Depending on the machine's settings, you may see the following screen on the display when
scanning from the exposure glass.
Basic Procedures for Saving Scan Files on a USB Flash Memory Device
171
To Next Page
Loading...
