Ricoh SP 3710SF - Printer Features Settings (When Using the Four-Line LCD Panel Model)

Printer Features Settings (When Using the Four-
line LCD Panel Model)
This function is available for SP 330SN only.
List/Test Print
Prints lists showing configurations on the machine.
The lists will be printed using the tray set for [Printer] under [Paper Tray Priority] in [Tray Paper
Settings] on A4 or Letter size paper.
Item Description
Test Page Prints a test page for checking the single-sided printing condition. The test page
contains network settings.
PCL Font List Prints installed PCL font list.
PS Font List Prints installed PostScript font list.
Duplex Test
Page
Prints a test page for checking the duplex printing condition.
System
Item Description Value
Copies Sets the machine to print the specified
number of sets.
This setting is disabled if the number of
pages to print is specified by the
printer driver.
1 to 999
Default: 1
Sub Paper
Size
Sets the machine to print onto paper of
another size if the specified paper is
not loaded in any tray. Alternative
sizes are preset to A4 and Letter.
• Auto
• Off
Default: [Auto]
Printer Features Settings (When Using the Four-line LCD Panel Model)
299