Ricoh SP 3710SF - Changing Operation Modes (When Using the Four-Line LCD Panel Model)

Changing Operation Modes (When Using the
Four-line LCD Panel Model)
This description is for SP 330SN only.
You can switch between copier and scanner modes by pressing the corresponding keys.
Press the [Copy] or [Scanner] key to activate each mode. While in each mode, the corresponding key
lights up.
DYG338
Function Priority
By default, copy mode is selected when the machine is turned on, or if the preset [System Auto
Reset Timer] time passes with no operation while the initial screen of the current mode is displayed.
You can change the selected mode using [Function Priority] under [Admin. Tools].
For details about [System Auto Reset Timer] or [Function Priority], see page 310 "Administrator
Tools Settings (When Using the Four-line LCD Panel Model)".
Changing Operation Modes (When Using the Four-line LCD Panel Model)
39