Ricoh SP 3710SF - Printer Features Settings (When Using the Touch Panel Model)

Printer Features Settings (When Using the
Touch Panel Model)
This function is available for SP 330SFN/3710SF only.
List/Test Print
Prints lists showing configurations on the machine.
The lists will be printed using the tray set for [Printer] under [Paper Tray Priority] in [Paper Settings]
on A4 or Letter size paper.
Item Description
Test Page Prints a test page for checking the single-sided printing condition. The test page
contains network settings.
PCL Font List Prints installed PCL font list.
PS Font List Prints installed PostScript font list.
Duplex Test
Page
Prints a test page for checking the duplex printing condition.
System
Item Description Value
Copies Sets the machine to print the specified
number of sets.
This setting is disabled if the number of
pages to print is specified by the
printer driver.
1 to 999
Default: 1
Sub Paper
Size
Sets the machine to print onto paper of
another size if the specified paper is
not loaded in any tray. Alternative
sizes are preset to A4 and Letter.
• Auto
• Off
Default: [Auto]
7. Configuring the Machine Using the Control Panel
262