Ricoh SP 3710SF - Registering Fax Destinations Using Web Image Monitor

10. Enter the fax number, and then press [OK].
If you want to delete the fax number, press [ ] or [C] until the current number is deleted.
11. Confirm the setting, and then press [OK].
12. Press the [Home] key.
Registering Fax Destinations Using Web Image Monitor
1. Start the web browser and access the machine by entering its IP address.
2. Click [Quick Dial Destination] or [Fax Speed Dial Destination].
3. From the [Destination Type] list, select [Fax].
4. Select [Quick Dial Number] or [Speed Dial Number], and then select the registration
number from the list.
5. Register information as necessary.
6. Enter the administrator password if required.
7. Click [Apply].
8. Close the web browser.
Fax destination settings
Item Setting Description
Quick Dial Number /
Speed Dial Number
Required
Select the number to which you want to register Quick
Dial or Speed Dial destination.
Name Optional
Name of the destination. The name specified here will
be shown on the screen when selecting a fax
destination. Can contain up to 20 characters.
6. Sending and Receiving a Fax
200