Ricoh SP 3710SF - Network Settings (When Using the Four-Line LCD Panel Model)

Network Settings (When Using the Four-line
LCD Panel Model)
This function is available for SP 330SN only.
• Depending on the settings you change, the machine might need to be restarted.
• Depending on the model you are using, some items might not appear.
Wired (Ethernet)
Item Description Value
MAC Address Displays the machine's MAC address. –
Ethernet Speed Displays the current Ethernet speed
setting.
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
• Ethernet Unavailable
Appears when a network cable
is not connected.
Set Ethernet
Speed
Specifies the speed for Ethernet
communication. Select a speed that
matches your network environment.
For most networks, the default setting is
the optimum setting.
• Auto Select
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
Default: [Auto Select]
Network Settings (When Using the Four-line LCD Panel Model)
319