Ricoh SP 3710SF - Page 322

Wireless (Wi-Fi)
Item Description Value
Enable
Wireless (Wi-
Fi)
Select whether to enable or disable
Wireless LAN.
If [Disable] is set, [Wireless (Wi-Fi)
Status], [MAC Address], [Current
Connection], [Input SSID], [WPS],
[Wi-Fi Direct], [Wi-Fi Dir. PWD], and
[Wi-Fi Direct Type] are not displayed.
• Disable
• Enable
Default: [Disable]
Wireless (Wi-
Fi) Status
Displays the current connection status. -
MAC Address Displays the machine's MAC address. -
Current
Connection
Displays detailed information about
the connection, such as the SSID and
the wireless signal strength.
-
Input SSID Input the SSID of the machine. -
WPS Connects with one touch using WPS
(Wi-Fi Protected Setup). For details,
see Setup Guide.
• PBC
• PIN
Wi-Fi Direct Input the SSID of the machine to
configure Wi-Fi Direct.
-
Wi-Fi Dir.
PWD
Input SSID to set a password for Wi-Fi
Direct.
-
Wi-Fi Direct
Type
Select 2.4 GHz or 5 GHz as the
wireless LAN frequency.
• 2.4 GHz
• 5 GHz
Default: [2.4 GHz]
IPv4 Configuration
Item Description Value
DHCP Sets the machine to receive its IPv4
address, subnet mask, and default
gateway address automatically from a
DHCP server.
• Inactive
• Active
Default: [Active]
7. Configuring the Machine Using the Control Panel
320