Ricoh SP 3710SF - Page 323

Item Description Value
IP Address Specifies the machine's IPv4 address
when DHCP is not used.
Use this menu to check the current IP
address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
Subnet Mask Specifies the machine's subnet mask
when DHCP is not used.
Use this menu to check the current
subnet mask when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
Gateway
Address
Specifies the machine's default
gateway address when DHCP is not
used.
Use this menu to check the current
default gateway address when DHCP
is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
IP Address
Method
Displays the IP address acquisition
method.
• IP Not Ready
• DHCP
• Auto IP
• Manual Configuration
• Default IP
Wi-Fi Direct IP
Address
Displays the IP address of Wi-Fi Direct. –
IPv6 Configuration
Item Description Value
IPv6 Select whether to enable or disable
IPv6.
• Inactive
• Active
Default: [Inactive]
DHCP Sets the machine to receive its IPv6
address from a DHCP server.
• Inactive
• Active
Default: [Active]
IP Address
(DHCP)
Displays the IPv6 address obtained
from a DHCP server.
–
Network Settings (When Using the Four-line LCD Panel Model)
321