Ricoh SP 3710SF - Page 191

There are five image density levels. The higher the density level, the darker the scanned image.
When using the touch panel model
1. Press the [Home] key.
DYG322
2. Press the [Scanner] icon on the [Home] screen.
3. Press [Scan Setting].
4. Press [ ] or [ ] to select the desired density level, and then press [OK].
When using the four-line LCD panel model
1. Press the [Density] key.
DYG320
2. Press the [ ] or [ ] key to select the desired density level, and then press the [OK]
key.
• You can change the machine's default [Density] setting to always scan with a specific density level.
For details, see page 244 "Scanner Features Settings (When Using the Touch Panel Model)" or
page 292 "Scanner Features Settings (When Using the Four-line LCD Panel Model)".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Reset Timer] or [System
Auto Reset Timer] while the initial screen is displayed. For details, see page 271
Specifying Scan Settings for Scanning
189