Ricoh SP 3710SF - Page 193

When using the four-line LCD panel model
1. Press the [Image Quality] key.
DYG323
2. Press the [ ], [ ], [ ], or [ ] key to select the desired resolution, and then press the
[OK] key.
• You can change the machine's default [Resolution] setting to always scan with a specific resolution
level. For details, see page 244 "Scanner Features Settings (When Using the Touch Panel Model)"
or page 292 "Scanner Features Settings (When Using the Four-line LCD Panel Model)".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Reset Timer] or [System
Auto Reset Timer] while the initial screen is displayed. For details, see page 271
"Administrator Tools Settings (When Using the Touch Panel Model)" or page 310
"Administrator Tools Settings (When Using the Four-line LCD Panel Model)".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Specifying Scan Settings for Scanning
191