Ricoh SP 3710SF - Page 139

When using the touch panel model
1. Press the [Home] key.
DYG322
2. Press the [Copier] icon on the [Home] screen.
3. Press [Text/Photo].
4. Select the desired document type, and then press [OK].
When using the four-line LCD panel model
1. Press the [Image Quality] key.
DYG323
2. Press the [ ] or [ ] key to select the desired document type, and then press the [OK]
key.
• You can change the machine's default [Original Type] setting to always make copies with a
specific document type. For details, see page 239 "Copier Features Settings (When Using the
Touch Panel Model)" or page 287 "Copier Features Settings (When Using the Four-line LCD Panel
Model)".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Reset Timer] or [System
Auto Reset Timer] while the initial screen is displayed. For details, see page 271
Specifying Scan Settings for Copying
137