2. Press the [Home] key.
3. Press the [Scanner] icon on the [Home] screen.
4. Press the [Folder] tab.
5. Press [Address Book].
6. Select the desired destination by pressing the small square.
A check mark appears in the small square. Press the small square again to cancel the
selection.
7. Press [OK].
8. Press the [Start] key.
Depending on the machine's settings, you may see the following screen on the display when
scanning from the exposure glass.
If you see this screen, proceed to the next step.
Basic Operation of Scan to Folder
157
To Next Page
Loading...
