When using the touch panel model
1. Place the original on the exposure glass or in the ADF.
To place the original, see page 89 "Placing Originals".
2. Press the [Home] key.
3. Press the [Scanner] icon on the [Home] screen.
4. Press the [Email] tab.
5. Press [Address Book].
6. Select the desired destination by pressing the small square.
A check mark appears in the small square. Press the small square again to cancel the
selection.
7. Press [OK].
8. Press the [Start] key.
Depending on the machine's settings, you may see the following screen on the display when
scanning from the exposure glass.
5. Scanning Originals
162
To Next Page
Loading...
