4. Select a number for [Special Sender No.] from the list (1 to 30).
5. Enter the special sender's fax number (up to 20 characters) in [Special Sender Number].
6. Enter the administrator password if required.
7. Click Apply.
8. Close the web browser.
• You can use the numbers 0 to 9, spaces, alphanumeric characters, and symbols.
Limiting the incoming faxes
This section explains how to set the machine to receive (or reject) faxes only from the programmed
special senders.
1. Start the web browser, and access the machine by entering its IP address.
2. Press [Special Sender].
3. Select senders from whom to receive faxes in [Reception Conditions].
• [All Senders]
Select this to receive faxes from all senders.
• [Not Special Sender]
Select this to reject faxes from the special senders and receive faxes from all other senders.
6. Sending and Receiving a Fax
232
To Next Page
Loading...
