1. If you want to configure the machine's system settings, press the [User Tools] key.
Otherwise, press the [ ] or [ ] key while "Ready" is displayed on the initial screen of the Copy
and Scan settings.
2. Press the [ ] or [ ] key to select the settings you want to use.
For a list of available items, see page 237 "Menu Chart".
If you select [Address Book], [Network Settings], or [Admin. Tools] menu, you might be
requested to enter a password. Enter the four-digit password, and then press the [OK] key.
For details about the password, see [Admin. Tools Lock] on page 310 "Administrator Tools
Settings (When Using the Four-line LCD Panel Model)".
3. To confirm setting items and values displayed, press the [OK] key.
4. To go back to the previous item, press the [Back] key.
• To return to the initial screen, press the [Back] key the same amount of times as the number of
selected items, or press the [User Tools] key once.
• Some setting items will be reflected after the machine restarts.
7. Configuring the Machine Using the Control Panel
236
To Next Page
Loading...
