Item Description Value
Density Specifies the image density for scanning
originals.
Increase the level (black squares) to
increase the density.
Default: The default setting is the middle
of 5 adjustment levels.
Resolution Specifies the resolution for scanning the
original.
• 100 × 100dpi
• 150 × 150dpi
• 200 × 200dpi
• 300 × 300dpi
• 400 × 400dpi
• 600 × 600dpi
Default: [300 × 300dpi]
Compression
(Color)
Specifies the color compression ratio for
JPEG files. The lower the compression
ratio, the higher the quality but greater
the file size.
• Low
• Medium
• High
Default: [Medium]
Limitless Scan Sets the machine to request next originals
when scanning with the exposure glass.
• Off
• On
Default: [Off]
Single/ Multi
Page
Specifies whether to create a multi-page
file containing all pages or separate
single-page files when scanning multiple
pages.
Note that a scanned file can contain
multiple pages only when the file format
is PDF or TIFF. If the file format is JPEG, a
single-page file is created for each
scanned page.
• Multi-page
• Single Page
Default: [Multi-page]
Scanner Features Settings (When Using the Touch Panel Model)
245
To Next Page
Loading...
