Item Description Value
Auto Redial Sets the machine to redial the fax
destination automatically when the line
is busy or a transmission error occurs, if
the machine is in Memory Transmission
mode. The number of redial attempts is
preset to two or three times, depending
on the [Country] setting under
[Administrator Tools], in five-minute
intervals.
• Off
• On
Default: [On]
Print Fax
Header
Sets the machine to add a header to
every fax you send. The header
includes the current date and time, user
fax name and fax number of the
machine, job ID, and page
information.
• Off
• On
Default: [On]
Fax Original Specifies the orientation to fax and
whether to have faxes printed in both
sides.
• Simplex Portrait
• Dup.Portrait:T to T
• Dup.Portrait:T to B
• Dup.Landscape:T to T
• Dup.Landscape:T To B
Default: [Simplex Portrait]
TX/RX Switch Setting
Item Description Value
TX/RX Switch
Setting
Specifies whether to switch the
transmission and reception modes of
the machine automatically or
manually.
• TX/RX Auto Setting
• TX/RX Manual Setting
Default: [TX/RX Manual Setting]
7. Configuring the Machine Using the Control Panel
254
To Next Page
Loading...
