Ricoh SP 3710SF - Page 274

Item Description Value
Program Fax
Info.
Specifies the fax name and
fax number of the machine.
• Number:
Specifies the fax number of the machine using
up to 20 characters, including 0 to 9, space,
and "+".
• Name:
Specifies the fax name of the machine using
up to 20 alphanumeric characters and
symbols.
Dial/Push
Phone
Specifies the line type of the
telephone line.
To configure this setting,
contact your telephone
company and select the
setting based on your
telephone line. Selecting a
wrong setting may cause
failures in fax transmissions.
[Dial Phone (20PPS)] may
not appear depending on
the country setting of the
machine.
• Push Phone
• Dial Phone (10PPS)
• Dial Phone (20PPS)
Default: [Push Phone]
PSTN / PBX Sets the machine to connect
to the public switched
telephone network (PSTN) or
a private branch exchange
(PBX).
• PSTN
• PBX
Default: [PSTN]
PBX Access
Number
Specifies the dial number to
access the outside line when
the machine is connected to
a PBX.
Make sure that this setting
matches the setting of your
PBX. Otherwise, you may not
be able to send faxes to
outside destinations.
0 to 999
Default: 9
7. Configuring the Machine Using the Control Panel
272