Ricoh SP 3710SF - Page 286

Item Description Value
IPV6 DHCP Sets the machine to receive its IPv6
address from a DHCP server.
• Inactive
• Active
Default: [Active]
Manually Set
Address
Specifies the machine's IPv6 settings. • Manually Set Address
Specifies the machine's IPv6
address when DHCP is not used.
Can contain up to 39
characters.
For details about entering
characters, see page 46
"Entering Characters (When
Using the Touch Panel Model)".
• Prefix Length
Specifies the prefix length, using
a value between 0 and 128.
• Gateway Address
Specifies the IPv6 address of the
default gateway. Can contain
up to 39 characters.
For details about entering
characters, see page 46
"Entering Characters (When
Using the Touch Panel Model)".
IP Address
(DHCP)
Displays the IPv6 address obtained
from a DHCP server.
–
Stateless
Address
Displays the IPv6 stateless addresses
obtained from a Router Advertisement.
• Stateless Address 1
• Stateless Address 2
• Stateless Address 3
• Stateless Address 4
Link-local
Address
Displays the IPv6 link local address. –
7. Configuring the Machine Using the Control Panel
284