Ricoh SP 3710SF - Page 311

Item Description Value
Paper Tray
Priority
Specifies the tray that the
machine checks first for paper
that can be used for the job
when a tray is set to be selected
automatically.
If multiple trays contain valid
paper, the first tray the machine
finds will be used for printing;
when that tray runs out of
paper, the machine
automatically switches to the
next tray to continue printing.
If Tray 2 is not installed, [Tray
2] does not appear.
• Printer
Select a tray to check first when automatic tray
selection is specified for the print job.
• Tray 1
• Tray 2
• Bypass Tray
Default: [Tray 1]
• Copier
Select a tray to check first when [A4], [8 1/2 ×
11], or [16K] is selected for [Select Paper]
under [Copier Features].
• Tray 1
• Tray 2
• Bypass Tray
Default: [Tray 1]
Size
Mismatch
Detection
Sets the machine to report an
error if the paper size does not
match the print job's settings.
• On
• Off
Default: [Off]
Tray Paper Settings (When Using the Four-line LCD Panel Model)
309