Ricoh SP 3710SF - Page 313

Item Description Value
System Auto
Reset Timer
Sets the machine to return to
the mode specified in
[Function Priority].
• 30 sec.
• 1 min.
• 2 min.
• 3 min.
• 5 min.
• 10 min.
• Off
Default: [1 min.]
Energy Saver
Mode
Sets the machine to enter
Energy Saver mode, Energy
Saver mode 1 or Energy
Saver mode 2, to reduce
power consumption. The
machine recovers from
Energy Saver mode when it
receives a print job or one of
the keys on the control panel
is pressed.
• EnergySaverMode 1
The machine enters Energy Saver mode 1 if
the machine has been idle for about 30
seconds. It takes less time to recover from
Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power
consumption is higher in Energy Saver mode 1
than in Energy Saver mode 2.
• Off
• On
Default: [Off]
Administrator Tools Settings (When Using the Four-line LCD Panel Model)
311