Ricoh SP 3710SF - Page 316

Item Description Value
Reset Settings Be sure not to clear the
settings by mistake.
• Reset All Settings
Resets the machine's settings to their defaults
except the following:
• Language settings
• Network settings
Press the [OK] key to execute. Press the [Back]
key to exit to the previous level of the menu
tree without clearing the settings.
• Reset Network Settings
Resets the network settings to their defaults.
Press the [OK] key to execute. Press the [Back]
key to exit to the previous level of the menu
tree without clearing the settings.
Shortcut to
Function
Assigns one of the following
functions to the [Shortcut to
Func.] key on the control
panel.
• ID Card Copy Mode
• Select Scanner Address
Default: [ID Card Copy Mode]
PCL6 Set this to [Universal] when
using the Universal Driver
and to [SP
330/2300/3700/3710]
when using the normal
driver.
• Universal
• SP 330/2300/3700/3710
Default: [SP 330/2300/3700/3710]
Admin. Tools
Lock
Specifies a four-digit
password for accessing the
[Network Settings], [Wi-Fi
Setup Wizard], and [Admin.
Tools] menus.
Do not forget this password.
• On (0000 to 9999)
• Off
Default: [Off]
IPsec Selects whether to enable or
disable IPsec.
This function appears only
when a password is
specified under [Admin.
Tools Lock].
• Inactive
• Active
Default: [Inactive]
7. Configuring the Machine Using the Control Panel
314