6. Slide the print cartridge in horizontally. When the cartridge can go no further, raise it
slightly and push it fully in. Then push down on the cartridge until it clicks into place.
7. Using both hands, carefully push up the front cover until it closes.
• When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.
Removing jammed paper from the standard tray or duplex unit
• When Using the Touch Panel Model
If "Misfeed: Standard Tray" or "Misfeed: Duplex Unit" appears on the display, follow the
procedure below to remove it.
• When Using the Four-line LCD Panel Model
If "Misfeed: Main Tray" or "Misfeed: Dup. Unit" appears on the display, follow the procedure
below to remove it.
1. Open the rear cover.
Removing Paper Jams
409
To Next Page
Loading...
