12. Confirm the size you entered is displayed, and then press [OK].
13. Press the [Home] key.
When Using the Four-line LCD Panel Model
1. Press the [User Tools] key.
2. Press the [ ] or [ ] key to select [Tray Paper Settings], and then press the [OK] key.
3. Press the [ ] or [ ] key to select the paper size setting for the desired tray, and then
press the [OK] key.
4. Press the [ ], [ ], [ ], or [ ] key to select [Custom Size], and then press the [OK]
key.
5. Press the [ ] or [ ] key to select [mm] or [inch], and then press the [OK] key.
6. Enter the width using number keys, and then press the [OK] key.
To enter a decimal point, press [
].
7. Enter the length using number keys, and then press the [OK] key.
To enter a decimal point, press [ ].
8. Press the [User Tools] key to return to the initial screen.
• When using the touch panel model, you can also enter a size by using the number keys. To enter a
size by using the number keys, press the box in Steps 8 and 10 only once.
• When using the four-line LCD panel model, you can press the [Back] key to exit to the previous
level of the menu tree.
2. Paper Specifications and Adding Paper
68
To Next Page
Loading...
