Parameters
Channel
RS232: This channel is the programming port, it can be used to monitor or display the communication
status of the below accessories:
ELC-RS232 cable
ELC-USB cable
PRO-RS485 cable
ELC-MEMORY
ELC-Copier
RS485: This channel is the RS485 port, it can be used to monitor or display the communication status of
the below accessories:
For Standard ELC-12 Series
ELC12-E-RS485
For ELC-12DC-DA-R-N-HMI CPU
EXM-E-RS485
For ELC-18/22/26 Series CPUs
ELC-RS485
Ethernet: This channel is the Ethernet port, it can be used to monitor or display the communication
status of the LAN port built-in in the CPU:
Timeout 1—100s
Monitor type
Tx : Data from CPU to external devices.
Rx: Data from external device to CPU
Tx+Rx: Data transmission between external device and CPU.
Description of the function
To Next Page
Loading...
