Rievtech PR-6DC-DA-R - How to Configure the Network Parameters through Program Software

252
configuration software
eSmsconfig)
The menu is Transfer-> Web
server config
TCP Server/client
Work as TCP server or clients at
the same time.
Only one mode can be applied
( tcp server or
Tcp client)
TCP Connections.
Max separate tcp
connections(Tcp server+Tcp
clients) :8
Works as Tcp client: Can connect
1 Tcp server.
Works as TCP
Built-in Web
server(Control&Software)
Yes
No.
6.2 How to Configure the Network parameters through program software?
For ELC-12-N or ELC-22-N, you can use xlogicsoft to configure the Ethernet network parameters through
the menu Tools-> transfer-> web server config
1. Local CPU Network settings
IP Address
Subnet Mask
Default Gateway