5.6 xLogicsoft
xLogicSoft
xLogicsoft runs under Windows 95/98,
Windows NT 4.0, Windows Me®, Windows 2000®, Windows XP®,windows Vista xLogicsoft is capable of
client/server operation and offers you a high degree of freedom for creating your circuit program.
xLogicSoft: xLogicV3.1.6.2
This is the current version of xLogicsoft. You will find all the functions and the functionality of the devices
described in this manual in the version 3.1.6.2 and later.
Note
If a full version is not installed, you can carry out an upgrade as follows:
Install the software from the CD.
When the system prompts you for the previous version, place the old xLogicsoft CD in CD drive.
Point your browser to the “...\Install” directory on the CD.
Updates and info
You can download demo versions of the software free of charge from the Internet address specified in the
preface.
Installing xLogicsoft:
To Next Page
Loading...
