Benefits:
While power consumption of load does not exceed output of switch’s voltage range, lamp can be directly
connected to xLogic main module; however, if power consumption of load exceeds output of switch’s
voltage range, then power contactor would be required.
You can connect directly lightness sensitivity switch to the input of xLogic.
Don’t need external timer, as this function has been integrated in xLogic.
It can be installed in a small-sized cabinet, so quite space-saving.
Quite easier to modify lighting system
According to your demand, you may setup supplementary on/off timing (lamp can be switched off in
order at the end of day.
Easier to apply role of lightness sensitivity switch to lamp or already modified lamp row.
7.6 Rainwater pump
Nowadays besides drinkable water in family, rainwater applications is gradually increasing. In this way
much costs can be saved, also environment can be improved as well. The application of rain water as
follows:
To Next Page
Loading...
