RKC INSTRUMENT RB100 User Manual

6. OPERATIONS OF THE BASIC FUNCTIONS
IMR02C15-E4
6-31
5. Press the key while pressing the key. The display goes to the PV/SV monitor.
6. In PV/SV monitor, press the key while pressing the key.
The display goes to the Mode switching.
7. Press the key until Set data unlock/lock transfer screen is displayed.
8. Press the key to change to 1. The parameter will change to LCK and the set value will change
to 1
. Press the key to change back to unlock (ULCK).
Set value and description
0000: Unlock
0001: Lock
9. Press the key to store the new value. The parameter LCK will stop flashing. The parameters
of F21 to F91 of Engineering mode are locked (no display), and the setting data cannot be
changed. (“!” will be displayed to indicate the locked state.)
After a new value is displayed on the display by using and keys, if no key operation is
performed within 1 minute without pressing key, this instrument returns to the Monitor
display mode and the set value will not be changed.
SET
R/S
SET
AUTo
0000
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
ULCK
0000
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
Set data unlock/lock transfer
SET
Flashing
ULCK
0000
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
LCK
0001
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
Flashing
SET
28
$
200
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
AUTo
0000
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
Mode switching
Auto/Manual transfer
SET
R/S
＋
SET
R/S
PV/SV monitor
MoNI
0000
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
28
$
200
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
SET
R/S
＋
LCK
0001
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
SET
Once
LCK
0001!
SV1
OUT1
OUT
2
A
T
DO1 DO
2
MAN
STOP
DO3
DO4
Lock symbol is displayed.
Flashing Lighting
This symbol is displayed when
the Set lock level is other than “0.”
SET

RKC INSTRUMENT RB100 Specifications

General

Brand	RKC INSTRUMENT
Model	RB100
Category	Temperature Controller
Language	English