ROBOT S6
‒ Danger of arms crushing
To close the battery cover, lower it
slowly to avoid trapping your hands.
‒ Body crushing hazard
Do not linger in the machine operating
area.
‒ Body crushing hazard
Do not linger in the machine operating
area.
2.6. SAFETY WARNINGS FOR REGULATIONS AND MAINTENANCE
‒ Always keep the machine in optimum operating condition and carry out the routine maintenance
according to the intervals and procedures specified by the Manufacturer.
A good maintenance will ensure a stable performance over time, longer working life and constant
compliance with the safety requirements.
‒ Enable all machine safety devices before performing any maintenance and regulation operations.
‒ Delimitate the work area complying with the safety conditions as provided by the standards on
workplace safety in order to minimise the risks.
‒ The maintenance interventions in the areas that are not easily accessible or dangerous must be carried
out after having ensured the necessary conditions.
‒ The personnel authorised to carry out the ordinary maintenance (regulations, replacements etc.) must
possess the necessary technical and professional knowledge.
‒ Wear the Individual Protection Devices provided by the laws on workplace safety and indicated in the
"Instructions for use" and/or affixed to the machine.
To Next Page
Loading...
