ROBOT S6
5. INFORMATION ON ADJUSTMENTS
5.1. RECOMMENDATIONS FOR ADJUSTMENTS
‒ Before performing any operation, the authorised operator must make sure that he/she
understood the "Instructions for use".
‒ Before carrying out any intervention, activate all the safety de-vices provided, stop the
machine and assess if any residual energy is still present.
‒ Provide suitable safety conditions in compliance with the regulations on workplace safety to
prevent and minimise the risks.
‒ Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED
PURPOSES and assess the possible RESIDUAL RISKS.
5.2. ADJUSTING FILM
"STRETCH"
"FRD" type reel carriages.
1. Use lever (A) to lock and unlockroller
(B).
2. Adjust hand wheel (C) to regulatethe
braking effect of the pre-stretchroller (B)
that determines film lengthening.
5.3. "FRD TYPE SPOOL
CARRIAGE" FORNET
Adjust handwheels (C-D) to regulate the
braking effect of the prestretch rollers
(E-F) that determine tensioning of the
net.
Important
In order to obtain the correct tensioning
of the wire support, adjust the braking
effect so that the (F) output roller is
more braked than the (E) input roller;
also, to prevent the wire support from
slipping on the drawing rollers, the latter
should not be excessively braked.
To Next Page
Loading...
