Robopac S6 - Safety Device Descriptions

ROBOT S6
3.3. SAFETY DEVICE DESCRIPTIONS
T
he figure shows the position of the safety devices, whose description and function is provided in the following
list.
A
) Safety bumper: In case of collision against an obstacle, it stops the machine run and the wrapping
cycle.
T
o reset the machine, remove the obstacle, cut the film and
p
ress the control.
When the roll-holder carriage has reached its starting position, restart the machine to repeat the
wrapping.
For further details, see paragraph "Wrapping Start and Stop".
B) Emergency stop push-button: it is used to stop with a voluntary action, in case of imminent risk, the
organs of the machine that may pose a rick.
T
he control must sta
y
"locked" until all the normal o
p
eratin
g
conditions have been restored.
Restore the normal operating conditions, cut the film, unlock the button and press the control to reset
the machine.
When the roll-holder carriage has reached its starting position, restart the machine to repeat the
wrapping.
For further details, see
p
ara
g
ra
p
h "Wra
pp
in
g
Start and Sto
p
".
C) Light indicator (orange light): It indicates that the machine is running.
D) Acoustic warning: It warns that the wrapping cycle has started.
19/94