ROBOT S6
3. TECHNICAL INFORMATION
3.1. MACHINE GENERAL DESCRIPTION
‒ The S6-series ROBOT is a semiautomatic self-propelled machine designed to wrap and stabilize
palletized loads using a stretchable film.
‒ The machine is suitable for installation in workshops and factories, protected against weather
conditions. The installation surface must be plane and even, to allow the machine to easily move
around the pallet.
ust one operator is required to bring the machine close to the pallet, tie the film, carry out the cutting
at the end of the wrapping and resupply the reel.
‒ If the machine is equipped with an automatic cutting device, the film is automatically cut at
the end of each wrapping cycle.
‒ The loads are wrapped using reels of stretchable film which can be readily found on sale.
‒ The machine must be EXCLUSIVELY used in order to wrap and stabilise products contained in packs
(boxes, containers for liquids, etc.), having a regular shape or a shape that allows for stable palletising.
‒ The packs that contain liquids or insubstantial materials must be suitable for the product and must be
perfectly closed and tight in order to prevent any leaks of the content.
‒ The machine is equipped with a series of safety devices designed to avoid any harm befalling the
operator or other persons who come into contact with the machine in any way.
‒ The machine frame is provided with special points (right-hand & lefthand sides and column side) for the
handling with a forklift device.
Use of this machine in explosive environments or when exposed to the elements is strictly
forbidden.
‒ The machine is manufactured in various models to satisfy the different market requirements.
To Next Page
Loading...
