ROBOT S6
4. INFORMATION ON HANDLING AND INSTALLATION
OPERATIONS
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
Before performing any operation, the authorised operator must make sure that he/she
understood the "Instructions for use".
Carefully read the "Instructions for use" specified in the manual and those applied directly
to the machine and/or the package.
Provide suitable safety conditions in compliance with the regulations on workplace safety to
prevent and minimise the risks.
Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED
PURPOSES and assess the possible RESIDUAL RISKS.
4.2. PACKAGING AND UNPACKING
he packing is realised, keeping the overall dimensions low, also in consideration of the transport chosen.
o facilitate transport, shipping can be performed with some components disassembled and appropriately
protected and packaged.
Some parts, especially electric equipment, are protected with anti-moisture nylon covers.
he cases are marked with all necessary information for loading and unloading.
During unpacking, check the integrity and exact quantity of components.
Packaging material should be appropriately disposed according to the laws in force.
he figures show the most common types of packages.
Packaging on pallet with protective nylon
To Next Page
Loading...
