Robopac S6 - Safety Warnings for Use and Operation; Safety Warnings Related to Incorrect Use

ROBOT S6
‒ Install the machine in environments (artisan and industrial) with a flat surface that has no bumps so as
to move easily round the pallet.
‒ Dismantle all the packaging components in compliance with the standards in force in the country of
installation.
Non compliance with the instructions given may cause risks for safety and health of the
p
ersons and economic dama
g
es.
2.3. SAFETY WARNINGS FOR USE AND OPERATION
‒ The operator must be trained and possess the proper knowledge required to carry out the specific tasks
and must meet the conditions required for the safe use of the machine.
‒ When using the machine for the first time, the operator must read the manual and identify the controls
and simulate some operations, especially the start-up and shutdown.
‒ The machinery has been designed and manufactured to satisfy all theoperating conditions indicated by
the manufacturer.
‒ The machine shall be used ONLY for the purposes and complying with the procedures specified by the
Manufacturer.
Use the machine ONLY with the ori
g
inal safet
y
devices installed b
y
the manufacturer.
‒ ALWAYS wear the individual safety devices indicated in the "Instructions for use" and provided by the
standards in force regarding the safety at workplace.
‒ Always keep the perimeter spaces in suitable conditions and without obstacles to ensure the machine
works correctly.
‒ The machine must be used by one operator ONLY, that must be assigned and authorised by the
employer.
Non compliance with the instructions given may cause risks for safety and health of the
p
ersons and economic dama
g
es.
2.4. SAFETY WARNINGS RELATED TO INCORRECT USE
Read the next warnings carefully.
2.4.1.INCORRECT USE THAT CAN BE REASONABLY EXPECTED
‒ The predictable incorrect use consists of: “the use of the machine different from the indications given in
the manual, that may stem from the easily predictable human behaviour”.
T
he machine must be EXCLUSIVELY used in order to wrap and stabilise products containe
d
in packs (boxes, containers for liquids, etc.), having a regular shape or a shape that allows
for stable palletising.
T
he packs that contain liquids or insubstantial materials must be suitable for the produc
t
and must be perfectly closed and tight in order to prevent any leaks of the content.
‒ Do not use the machinery with the safety devices not properly installedand efficient.
‒ DO NOT tamper with, remove or bypass the safety devices installed on the machine.
‒ DO NOT modify the constructive and functional characteristics of the machine.
‒ Do not use the machine in spaces exposed to atmospheric agents, corrosive substances or at explosion/
fire risk.
‒ Do not use the machine as a transportation means for goods or persons.
‒ Do not use the machine to wrap and stabilise living beings (animals and humans).
‒ DO NOT wrap products that are loose, that have an irregular shape or that are not suitably collected, to
prevent inadequate palletisation.
‒ DO NOT use the machine with wrapping material different from that provided by the manufacturer.
‒ Do not over stretch or pre-stretch the film and do not wrap with an excessive number of bindings in
order to prevent damaging the packages and products contained inside.
‒ DO NOT use the machine on uneven or tilted surfaces.
‒ DO NOT use or let the machine be used for purposes or in ways not provided by the manufacturer.
9/94