ROBOT S6
3.5. DESCRIPTION OF ACCESSORIES ON REQUEST
o enhance the performance and to increase the versatility of the machine, the manufacturer furnishes the
accessories listed below.
‒ Non-stain wheels:
wheels made of a material that reduces stain formation on the floor.
‒ Additional Battery kit: it is equipped with a recharging device, two batteries and two baskets for
containing batteries.
The kit allows replacing the flat battery holder with the charged battery holder, to minimize the machine
downtime.
‒ Roll-holder shaft: It allows using film rolls with a different diameter with respect to the standard one.
‒ Reel holding carriage "FRD for net":
carriage for winding the pallet with a net film.
‒ Automatic cutting device: it cuts the film automatically at the cycle end.
‒ Photocell for black products: It offers a degree of sensitivity capable of detecting the height of pallets
with prevailing black surfaces.
‒ Side guide masts (increased): permit wrapping heights up to 2400 mm, 2800 mm and 3100 mm.
‒ Double feeler wheel (ø260÷400): It is suitable for wrapping the pallets where the product protrudes
from the outer perimeter in an irregular way.
‒ Sensing arm with a larger wheel (ø400): suitable for wrapping pallets whose product is not compact.
‒ Film breakage sensor: detects broken film and empty reel.
‒ Lightened rudder: allows the operator to move the machine manually with less effort. Also allows the
thrust of the feeler wheel to be adjusted more easily.
‒ Reel trolley with height 750 mm: allows the use of reels with height 750 mm (only for certain
markets).
‒ Battery charger with rapid charging: allows the batteries to be charged in about 10 hours (this value
depends on the state of the batteries).
‒ Battery charger with marking UL/CSA: only for certain markets.
‒ Film height adjuster – creasing device:
The device has a double function during the wrapping of the packaging, it can be used to adjust the
height of the film (height adjuster) or to tighten the film and form a reinforcement rope for the
packaging.