Robopac S6 - 1 General Information; Purpose of the Manual; Manufacturer and Machine Identification

ROBOT S6
1. GENERAL INFORMATION
1.1. PURPOSE OF THE MANUAL
‒ The manual is an integral part of the machine and is aimed to provide the operator the instructions for
use in order to prevent and reduce the risks that arise from man-machine interface.
T
he information have been written by the manufacturer into Italian (the original language)
in full com
p
liance with the
p
rofessional writin
g
p
rinci
p
les and the re
g
ulations in force.
T
he communication principles were chosen according to the target readers in order to eas
e
t
he readin
g
and understandin
g
of the information.
T
he information may be translated into other languages to satisfy the legal and/or marke
t
requirements.
T
he manuals must be translated directly from the ORIGINAL INSTRUCTIONS, withou
t
modification.
Each translation (including that provided by the purchasing agent or by the company that
introduces the machine into the country in question) must specify the message "Translation
of the original instruction".
‒ Keep this manual for the entire duration of its useful life in a well known and easy to access place,
available for reference any time the need should arise.
‒ In order to easily consult the specific topics of interest, check the table of contents.
‒ Some information may not correspond completely to the actual configuration of the machine delivered.
‒ Any additional information does not affect the readability of the text and the safety level.
‒ The manufacturer reserves the right to modify the contents of the manual without prior notice provided
that the safety level is not altered.
‒ All information supplied by the recipients represents an important contributionto the improvement of
the after-sales service that the manufacturerwill offer to his/her customers.
‒ The symbols described below are used to highlight the most important information or specifications.
i
Danger - Warning
T
he symbol indicates extremely hazardous situations which, if ignored, could seriously jeopardise personal
health and safety.
i
Caution - Warning
T
he symbol indicates that suitable actions must be adopted to preventpersonal health and safety risks and
avoid economic damages.
|
Important
T
his s
y
mbol indicates critical technical and o
p
eratin
g
informationthat shall be observed.
1.2. MANUFACTURER AND MACHINE IDENTIFICATION
T
he illustrated identification plate is applied directly on the machine. It contains references and indispensable
operating safety indications.
5/94