ROBOT S6
‒ When the machine in "stand-by" mode is not used for over 15 minutes, it automatically enters the
"energy saving" mode.
To resume operation, touch the machine display.
If the “power saving” function stays on for more than 60 minutes, the machine automatically turns off.
‒ Press the button (D) to turn off the machine.
6.17. FILM COIL FEEDING
Proceed as indicated.
1. Stop the machine in safety conditions.
2. Insert film reel (A) in the proper housing
on the reel carriage.
3. Collect some film (B) until a thin cord is
obtained and make it pass in the conical
area (C) of the rollers.
Important
Unwind the film according to the procedure shown on the label applied on the roll-holder carriage plate.
Reel holding carriage "FRD for net".
unwind the film as described in the relevant plate.
4. Pull the cord outwards.
The film will automatically drop on the roller and cover it all along its height.
‒ On reel carriage type "FRD", to insert
film or net between the rollers and its
unwinding, it is necessary to release the
brake by rotating hand wheel (D-D1-D2)
in position "0".
To Next Page
Loading...
