ROBOT S6
5.7. STEERING ARM RETURN
SPEED ADJUSTMENT
Use the screw (A) to adjust the steering
arm return speed.
The speed of the steering arm must
not be too high to avoid causing
personal safety risks.
5.8. ADJUSTING THE HEIGHT
OF THE SENSING ARM
WHEEL
‒ Pull knob (A), adjust the height of wheel
(C) by means of knob (B), then release
knob (A) ensuring that the pin correctly
inserts in one of the holes.
‒ To further increase the wheel height,
disassemble knob (B), remove the nut of
wheel (C) and then reassemble the
components on the other side of the
lever.
5.9. FEELER THRUST ADJUSTMENT
Proceed as indicated.
To Next Page
Loading...
