Robopac S6 - Page 3

ROBOT S6
5.3. "FRD TYPE SPOOL CARRIAGE" FORNET
5.4. "PDS" REEL TROLLEYS FOR CHANGING THE DRAWING RATIOS
5.5. REEL CARRIAGE LIFTING CHAIN ADJUSTMENT
5.6. BRAKE ADJUSTMENT
5.7. STEERING ARM RETURN SPEED ADJUSTMENT
5.8. ADJUSTING THE HEIGHT OF THE SENSING ARM WHEEL
5.9. FEELER THRUST ADJUSTMENT
5.9.1. STANDARD FEELER
5.9.2. LIGHTENED STEERING WHEEL (OPTIONAL)
6. ABOUT THE USE
6.1. RECOMMENDATIONS FOR OPERATION AND USE
6.2. CONTROL DESCRIPTION
6.3. DESCRIPTION OF THE USER INTERFACE
6.3.1. NUMERIC AND ALPHANUMERIC KEYPAD
6.3.2. SCHEDULE WINDOW
6.4. "HOME" SCREENSHOT
6.5. "MANUAL HANDLING" SCREENSHOT
6.6. "RECIPES" SCREENSHOT
6.6.1. “RECIPE COPY” SCREEN
6.6.2. “LEVEL COPY” SCREEN
6.6.3. SCREEN “DATA TRANSFER”
6.7. "WRAPPING CYCLE" SCREENSHOT
6.8. SCREENSHOT “GENERAL PARAMETERS”
6.9. "PRODUCTION COUNTERS (PALLETS") SCREENSHOT
6.10. “H.M.I. SETTINGS” SCREEN
6.11. "PASSWORD MODIFICATION" SCREENSHOT
6.12. "PASSWORD INSERTION (USER LOGIN)" SCREENSHOT
6.13. "SERVICE" SCREENSHOT
6.14. WRAPPING SCREEN WITH "SPECIAL CYCLES"
6.15. PROGRAMMING A NEW RECIPE
6.16. WRAPPING START AND STOP
6.17. FILM COIL FEEDING
6.18. ADJUSTING CUTTING
6.19. BATTERY CHARGING MODE
7. MAINTENANCE INFORMATION
7.1. MAINTENANCE INSTRUCTIONS
7.2. MAINTENANCE PERIOD TABLE
7.3. LUBRICATION POINT DIAGRAM
7.4. LUBRICANTS TABLE
8. TROUBLESHOOTING
8.1. ALARM MESSAGE LIST AND INFORMATION
9. SPARE PARTS REPLACEMENT INFORMATION
9.1. RECOMMENDATIONS FOR REPLACING PARTS
9.2. BATTERY REPLACEMENT
9.3. LIST OF THE RECOMMENDED SPARE PARTS
9.4. MACHINE DISPOSAL AND SCRAPING
9.4.1. TAKING THE MACHINERY OUT OF SERVICE
9.4.2. MACHINE SCRAPPING
10. ENCLOSED DOCUMENTATION
10.1. WARRANTY CONDITIONS
10.2. BATTERY CHARGER OPERATION MANUAL S.P.E.
10.3. BATTERY CHARGER OPERATION MANUAL NORDELETTRONICA
3/94