Robopac S6 - Page 57

ROBOT S6
Proceed as indicated.
1. Switch the machine off.
2. Lift the battery cover (A).
With the additional battery kit, simply
replace the basket with empty batteries
(see “Battery replacement”) with the
basket containing the charged batteries.
3. Insert the plug into a socket.
|
Important
If the operation is performed when the
machine is on, it will automatically turn
off during the final charging stage.
Any operation should be performed when
the machine is off in order to avoid any
damage to the components due to the
overvoltage that might be generated
during charging.
4. Perform the operation and check the charging cycle according to the instructions in the operation
manual of the electronic battery charger. For further details, refer to the relevant manual.
For further details, refer to the relevant manual.
Upon completion of the recharge, disconnect the plug and close the battery cover.
5. Restart the machine ONLY after checking that battery is completely charged (the green LED of battery
charger is on and fixed).
i
Caution - Warning
T
he battery is subject to a self-discharge process that may compromise its good operations in the long run.
Completely recharge the battery every two months in the event of periods of prolonged disuse.
|
Important
Wait for the end of the search before disconnecting the battery.
T
he interru
p
tion of the rechar
g
in
g
c
y
cle com
p
romises the life of the batteries.
T
he complete charging time with standard battery charger S.P.E. is approximately 13 hours.
T
he complete charging time with boost battery charger S.P.E. is approximately 10 hours.
T
he complete charging time with battery charger NORDELETTRONICA is approximately 10 hours.
57/94